New Marker Box!
I am super excited with my latest digital die cutting creation!
Allow me to introduce to you my new Marker Box!
This Marker Box holds 16 markers! You can use it as a gift or cut multiples and glue the sides together for your own storage! The box has two layers for the storage grid to hold the markers securely.
Supplies:
Cardstock: DCWV Stack
Die Cut: Marker Box (Jamie Lane Designs)
Twine: Marigold (The Twinery)
Tutorial:
1. The digital die cut has been spaced out for two different cuts; the main box and the grids with the front mat. The spacing allows you to place the main box on the active cutting area and once that cut is complete, simply drag the grid/mat pieces over to the active mat area (the main box will be off to the left and will not cut). Once you have all the pieces cut, fold on all the score lines.
2. Adhere the mat piece to the center of the main box leaving a slight edge as shown.
3. Place adhesive tape on the inside of the bottom tabs.
4. Pull the bottom piece up and adhere the tabs on the outside of the main area of the box as shown.
5. Place the small tabbed grid in the bottom of the box.
6. Place the large tabbed grid over the small grid pushing the large tabs down to the bottom of the box.
7. Your grids and box should look like this now.
8. Place adhesive tape along the white area below the mat and along both sides of the box as shown.
9. Remove the adhesive backing on the tape and then fold the two long sides in.
10. Your box should look like this when complete.
Tags:
3D
box
Copic
Jamie Cripps
Jamie Lane Designs
Marker
Meylah
Ribbons Unlimited
SVG
The Twinery
Tutorial
4 comments