Holiday Candy Holders

Post Comment

This candy holder has four slots to hold minatures candy bars.  The holder is approximately 3-1/14" x 2-3/4" x 2" when assembles.  The candy slots are approximately 1.125" x .4".  The file is compatible with both the 8x12 and 12x12 mats.  

Tutorial:
1.  Cut out all your pieces and fold on the score lines.  Adhere the four side tabs of each box to the box sides to form its shape.  Place adhesive on the sides of the large candy holder (shown with white here) as well as on the candy wrap (adhesive in the center and on each side of the score line which will touch the box base).
2.  Put the large candy holder over the smaller/shorter candy holder.
3.  Place the slotted candy holders in the main box.  Use a pencil to push the smaller slotted holder to the bottom of the box.  Secure adhesive so the inside box will not pull from the main box base.
4.  Adhere the candy holder to the wrap and adhere the coordinating mats in place.
Decorate and embellish as desired!

This 3 Bell Chocolate Holder follows the tutorial above.
This candy holder has three slots to hold Bell Chocolates.  The holder is approximately 4-1/2" x 4-1/4" x 2-1/2" when assembles.  The candy slots are approximately 1.125" x 1.125".  The file is compatible with both the 8x12 and 12x12 mats.  

This Cookie Tote follows the tutorial above.
This cookie tote has an open box to hold cookie or many other items!  The box storage area is approximately 3-1/2" x 2" x 1-1/4" and the assembled project is approximately 4-1/2" x 3-1/2" x 2". The file is compatible with both the 8x12 and 12x12 mats.  
https://jamielanedesigns.blogspot.com/2018/12/holiday-candy-holders.html




This candy holder holds three square specialty chocolate candies.  The holder is approximately 3-1/4" x 2 x 1-1/4" when assembled.  The file is compatible with both the 8x12 and 12x12 mats.  

For this box:
1.  Cut out all your pieces and fold on the score lines.
2. Place adheisve on the box tab and adhere to form its shape.  Close the bottom of the box by pushing in the slotted tab, then the two side tabs, then finally slide the tab into the slot to close.
3.  Insert the handles into the box.  One handle per side.
4.  Adhere the mats in place on the box and handle pieces.
5.  Insert your chocolate squares and embellish as desired! 





This fold-over candy holder holds one square specialty chocolate.  The holder is approximately 4-1/4" x 2-3/4" x 1/4" when assembled.  The file comes with the base, two coordinating mats, and the center candy holder.  The file is compatible with both the 8x12 and 12x12 mats. 
For these fold-over candy holders:
1. Cut out all your pieces and fold on the score lines.
2. Adhere mats to the front top and front bottom. Cut additional if you'd like the other areas covered.
3. For the candy insert, fold on the score lines.  Place strong adhesive on the back of the square as well on the two small side tabs.  Adhere the two side tabs to the backing so it forms the "box" shelf shape.  Adhere the entire piece to the center of the inside.
4. Fill with a chocolate square and embellish as desired!

This 3 chocolate fold-over candy holder holds 3 miniatures chocolate bars. The holder is approximately 4-1/4" x 2-3/4" x 1/2" when assembled. The file comes with the base, coordinating mats, and the center candy holder. The file is compatible with both the 8x12 and 12x12 mats. 
This fold-over gum holder holds a pack of your favorite gume. The holder is approximately 4-1/4" x 2-3/4" x 3/4" when assembled. The file comes with the base, coordinating mats, and the center gum holder. The file is compatible with both the 8x12 and 12x12 mats. Please note: The gum pack needs to be 3/4" or less in thickness to fit. You can find a full tutorial here: https://jamielanedesigns.blogspot.com/2018/12/holiday-candy-holders.html


This chocolate dolop fold-over candy holder holds 4 chocolate dolops. The holder is approximately 4-1/4" x 2-3/4" x 1" when assembled. The file comes with the base, coordinating mats, and the center candy holder. The file is compatible with both the 8x12 and 12x12 mats. 


This 3 chocolate fold-over candy holder holds 3 miniatures chocolate bars. The holder is approximately 4-1/4" x 2-3/4" x 1/2" when assembled. The file comes with the base, coordinating mats, the center candy holder, and paper embellishments. The file is compatible with both the 8x12 and 12x12 mats. 






Share:

0 comments

Related Posts Plugin for WordPress, Blogger...