Favor Bags and Center Pieces!
This bag is a great size for gift giving or using for a large favor bag...you can even size it to fit your needs! As it comes, the bag is approximately 8" (11-1/4" with handle) x 4" x 2-3/4". The file comes with the bag base pieces, the bag mats, the handle, the sentiment mat, and the celebrate sentiment. It is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
1. Cut out all your pieces and fold on the score lines.
2. Adhere the two box base pieces together and then place adhesive on the remaining side tab.
3. Adhere the tab to the other side of the box then pop the shape in to form.
4. Close the bottom of the box tucking the tab into the slot.
5. Adhere your handle in place and then adhere your mats and sentiment.
6. Finish adding all your mats. Embellish and fill as desired!
I love this little box! It is a 7-sided polygon with a hinged lid and mats so you can change its look easily! It is a great for gift giving or using for a favor box...you can even size it to fit your needs! As it comes, the box is approximately 2-3/4" x 3-3/4" x 3-3/4". The file comes with the box base pieces, the hinged lid pieces, and the box mats. It is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
2. Starting with the bottom (larger), place adhesive on the six tabs and begin wrapping the box sides around, adhering the tabs as you go.
3. Your finished box should look like this.
4. Next grab your lid piece (smaller).
5. Place adhesive on the six tabs and adhere the sides around as you did with the bottom.
6. Your lid should look like this now.
7. Place your mats on the small areas.
8. Place adhesive on the large tab. This goes on the outside of the box, all the way to the bottom so cover generously with adhesive.
9. Adhere your lid on to one of the panels on the outside of the box as shown.
10. Adhere your larger panel mats in place.
11. Your box will look like this now. To close the lid, you need to pull apart the sides a bit and then push down.
12. Adhere your final mat on the top of the lid and then embellish (and fill) as desired!
This 3D Star Centerpiece is perfect for so many occasions! The file comes sized at approximately 8" tall and it can be sized to fit your needs. The file comes with the star pieces and the base box and it is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
2. Starting with the bottom, place adhesive on the six tabs and begin wrapping the box sides around, adhering the tabs as you go.
3. Your finished box should look like this.
4. Cut out your three inside pieces and layer them on top of each other.
5. Bring them around in a circle form.
6. Insert them into the box base and then fluff out the layers to achieve your desired look.
This 3D Graduation Centerpiece is perfect for your party tables! The file comes sized at approximately 9" tall and it can be sized to fit your needs. The file comes with the graduation hat silhouette pieces and the base box and it is compatible with both the 8x12 and 12x12 mats. This one follows the same tutorial as the Star Centerpiece above.
This hinged box is approximately 4-1/4" x 2-3/4" x 1" and it comes with the box base and the coordinating mats. There is a small slot in the box that allows the lid to tuck in to hold it in place. The file is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
2. Place adhesive on the four small squares and adhere two to the bottom area...
3. And the other two to the top area as shown.
4. Adhere your top tabs down then place adhesive on the two long tabs.
5. Press the front side of the box in and adhere in place.
6. Gather your mat pieces.
7. Place the mats on the corresponding pieces of the box and embellish as desired.
Tags:
3D
Bits of Paper
Center Piece
Centerpiece
Cigarette box
Digital Cutting File
Graduation Center Pieces
Heptagon
Hinge
Hinged Box
Jamie Cripps
Jamie Lane Designs
Silhouette
Tutorial
2 comments