3D Multi-Sided Milk Carton Boxes!
Happy Monday! Today I am introducing my new Multi-Sided Milk Carton Boxes. These boxes were all created to work with both the 8x12 and 12x12 mats and they come with all the paper elements shown (I did use patterned papers to create my samples if you have questions, feel free to email me.). These boxes vary in sizes so I will add those in the box descriptions below. The measurements were taken at the widest points.
This box comes sized at approximately 4-1/2" x 3-3/4" with each panel being
just a little over 2". This box come as one piece for the main box.
Here is the tutorial:
1. Cut out your pieces and fold on the score lines. The flaps with the holes will point out.
2. Place adhesive on the two side tabs of the main box. Adhere the tabs to the other side of the box to form the shape.
3. Apply adhesive around the back edges of one of the box bottoms.
4. Form the shape of the box and adhere the box bottom in place.
5. Place adhesive on the remaining box bottom.
6. Insert the box bottom inside the box.
7. Adhere the bottom in place and then use a pen or another object to push it down and adhere in place. If you have issues forming the shape, you can insert the inside box bottom first then glue the bottom one on - either way works.
8. Insert your ribbon/twine through the box holes. Fill the box with your goodies.
9. Tie a bow then adhere your panels on the box. Embellish as desired.
This box comes sized at approximately 4-1/2" x 3-3/4" with each panel being
just a little over 2". This box come as one piece for the main box.
This box comes sized at approximately 6" x 3-3/4" with each panel being
just a little over 2". This box come as one piece for the main box.
This box comes sized at approximately 4" x 5" with each panel being
about 2". This box come as two pieces for the main box and can be
made larger if working with a 12x12 mat.
All the boxes with two pieces follow the instructions below...
Here is the tutorial:
1. Cut out your pieces and fold on the score lines. The flaps with the holes will point out.
2. Place adhesive on the side tabs of each box. Adhere the two boxes together.
3. Adhere the tabs to the other side of the box to form the shape.
4. Apply adhesive around the back edges of one of the box bottoms.
5. Form the shape of the box and adhere the box bottom in place.
6. Place adhesive on the remaining box bottom and insert the box bottom inside the box.
7. Adhere the bottom in place and then use a pen or another object to push it down and adhere in place. If you have issues forming the shape, you can insert the inside box bottom first then glue the bottom one on - either way works.
8. Insert your ribbon/twine through the box holes. Fill the box with your goodies.
9. Tie a bow then adhere your panels on the box. Embellish as desired.
This box comes sized at approximately 6-1/2" x 5-3/4" with each panel being
about 3-1/2". This box come as two pieces for the main box.
This box comes sized at approximately 4-1/2" x 4-1/4" with each panel being
about 2". This box come as two pieces for the main box and can be
made larger with either mat.
This box comes sized at approximately 4-1/2" x 4-1/4" with each panel being
about 2". This box come as two pieces for the main box and can be
made larger with either mat. This box comes with doily patterned mats.
This box comes sized at approximately 6-1/2" x 4-3/4" with each panel being
about 2-1/4". This box come as two pieces for the main box and can be
made larger with either mat.
This box comes sized at approximately 4-3/4" x 4-3/4" with each panel being
about 2". This box come as two pieces for the main box and can be
made larger with either mat. This box comes with rose cut mats.
This box comes sized at approximately 6-1/2" x 5-1/2" with each panel being
about 2-1/2". This box come as two pieces for the main box and can be
made larger with the 12x12 mat.
This box comes sized at approximately 4-3/4" x 4-3/4" with each panel being
about 2". This box come as two pieces for the main box and can be
made larger with either mat. This file also comes with a wrap
for the
bottom base of the box as well as the mats shown.
This box comes sized at approximately 6-1/4" x 5-1/4" with each panel being
about 2". This box come as two pieces for the main box and can be
made larger with the 12x12 mat. This box comes with arrow/chevron cut mats.
Tags:
3D
Bits of Paper
Boxes
Candle Birthday
Doily
Favor Box
Gift Box
Jamie Cripps
Jamie Lane Designs
Milk Carton
Rose
Silhouette
Tutorial
5 comments