Graduation is JUST around the corner!
These Wallet Sized Grade Frames are perfect for all those graduation parties. It is a quick and easy decoration that looks great against your table backdrops, across walls, table fronts, entryways, and more! Such a great way to show off your grad! Each frame is approximately 3-1/4" x 4-1/4" and holds a standard wallet sized photo (2-1/2" x 3-1/2"). The file comes with the two photo frames and an insert (in case you want to mat smaller images, or if you are missing a photo you can hand write a message!) and is compatible with both the 8x12 and 12x12 mats. The frames have a fold over tab so twine/ribbon can easily be attached. Looks for all SEVEN files to complete the set!
Here is the tutorial:
1. Cut out the frames in each file. NOTE: You will not need the insert piece unless you are matting a smaller photo or handwriting a message. Place a small strip of adhesive across the twine/ribbon tab as shown. I am using 1/8" double sided adhesive tape.
2. The back side of your frame will have adhesive down the side tab. Insert and center your photo using the tab cut to hold the bottom of the photo.
3. Fold over your side tab and adhere to the frame. Add another piece of adhesive on the tab front.
4. Close the frame, securing your adhesive to the frame back. NOTE: This tab was placed in the file so that adhesive would not interfere with the image.
5. Flip your frame over and insert your twine/ribbon toward the score line.
6. Then expose your adhesive and press down firmly. If you are using a thin ribbon or twine, you can still slide the frame so that you can position easily.
7-8. Continue building and attaching frames!
9. The photos will easily lift through the front so that they can be removed.
10. The tab slot shows through the back of the frame so that you can easily tuck images back in even when the frames are complete.
Tips for cutting: Use a smooth cardstock and slow your machine down. I am using a 60# weight cardstock and a speed of 4.
3D Mason Jar Graduation Hat
This 3D Graduation Hat fits a Pint Size Mason Jar or any item with less than a 3" diameter. The file comes with the pieces to create the hat as well as the tassel. All the pieces are compatible with both the 8x12 and 12x12 mats. You can fill your jars with money for gifts or fill with candy and use these as centerpieces for your tables! http://jamielanedesigns.blogspot.com/2015/06/mason-jar-graduation-hat.html
Here is the tutorial:
1. Cut out the hat pieces. Fold the tabs on the score line.
2. Place glue on the side tab and adhere to the other side.
3. Place adhesive on the edge of one of the circles.
4. Place the tabs down toward your table and then place the circle, adhesive side down, on the tabs.
5. Turn the piece over and place adhesive all over the back side.
6. Adhere the last circle in place to cover all the tabs.
7. Place adhesive on top of the circle.
8. Adhere the square in the center. Place a small foam adhesive on the little circle.
9. Cut out the tassel strips in your school colors.
10. Fold the strips in half and tie a piece of twine around the folded end as shown.
11. Adhere the small circle in the center of the square and loop the tassel around, curving the ends.
This bag is a great size for gift giving or using for a large favor bag...you can even size it to fit your needs! As it comes, the bag is approximately 8" (11-1/4" with handle) x 4" x 2-3/4". The file comes with the bag base pieces, the bag mats, the handle, the sentiment mat, and the celebrate sentiment. It is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
1. Cut out all your pieces and fold on the score lines.
2. Adhere the two box base pieces together and then place adhesive on the remaining side tab.
3. Adhere the tab to the other side of the box then pop the shape in to form.
4. Close the bottom of the box tucking the tab into the slot.
5. Adhere your handle in place and then adhere your mats and sentiment.
6. Finish adding all your mats. Embellish and fill as desired!
I love this little box! It is a 7-sided polygon with a hinged lid and mats so you can change its look easily! It is a great for gift giving or using for a favor box...you can even size it to fit your needs! As it comes, the box is approximately 2-3/4" x 3-3/4" x 3-3/4". The file comes with the box base pieces, the hinged lid pieces, and the box mats. It is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
1. Cut out all your pieces and fold on the score lines.
2. Starting with the bottom (larger), place adhesive on the six tabs and begin wrapping the box sides around, adhering the tabs as you go.
3. Your finished box should look like this.
4. Next grab your lid piece (smaller).
5. Place adhesive on the six tabs and adhere the sides around as you did with the bottom.
6. Your lid should look like this now.
7. Place your mats on the small areas.
8. Place adhesive on the large tab. This goes on the outside of the box, all the way to the bottom so cover generously with adhesive.
9. Adhere your lid on to one of the panels on the outside of the box as shown.
10. Adhere your larger panel mats in place.
11. Your box will look like this now. To close the lid, you need to pull apart the sides a bit and then push down.
12. Adhere your final mat on the top of the lid and then embellish (and fill) as desired!
This 3D Star Centerpiece is perfect for so many occasions! The file comes sized at approximately 8" tall and it can be sized to fit your needs. The file comes with the star pieces and the base box and it is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
1. Cut out all your pieces and fold on the score lines.
2. Starting with the bottom, place adhesive on the six tabs and begin wrapping the box sides around, adhering the tabs as you go.
3. Your finished box should look like this.
4. Cut out your three inside pieces and layer them on top of each other.
5. Bring them around in a circle form.
6. Insert them into the box base and then fluff out the layers to achieve your desired look.
This 3D Graduation Centerpiece is perfect for your party tables! The file comes sized at approximately 9" tall and it can be sized to fit your needs. The file comes with the graduation hat silhouette pieces and the base box and it is compatible with both the 8x12 and 12x12 mats. This one follows the same tutorial as the Star Centerpiece above.
This hinged box is approximately 4-1/4" x 2-3/4" x 1" and it comes with the box base and the coordinating mats. There is a small slot in the box that allows the lid to tuck in to hold it in place. The file is compatible with both the 8x12 and 12x12 mats.
Here is the tutorial:
1. Cut out all your pieces and fold on the score lines.
2. Place adhesive on the four small squares and adhere two to the bottom area...
3. And the other two to the top area as shown.
4. Adhere your top tabs down then place adhesive on the two long tabs.
5. Press the front side of the box in and adhere in place.
6. Gather your mat pieces.
7. Place the mats on the corresponding pieces of the box and embellish as desired.
This Graduation Hat Card box is perfect for sitting on your main graduation party table for all your guests to stuff with cards! The box will accept cards up to 5"x7" with envelopes the lid lifts easily if larger cards need to be placed in diagonally. The box comes sized at approximately 7" x 8" x 8" with the lid in place and it is compatible with both the 8x12 and 12x12 mats. There is a place to add your own tassel or you can make one from twine!
Here is the tutorial:
1. Cut out all your pieces. Gather the two sides shown.
2. Next gather the next two sides as shown.
3. Adhere the first two sides together.
4. Adhere the third panel in place.
5. Adhere the fourth panel in place.
6. Place adhesive on the remaining tab and adhere it to the other side of the box.
7. Push the box up to form the shape and then on the bottom, tuck the two sides in and then tuck the tab into the slot.
8. Your bottom will look like this.
9. Next you are going to build the lid frame. Do the same as you did the box, adhering the pieces together to form a long strip.
10. Adhere the side together to form the shape.
11. Place a strong adhesive on the top as shown.
12. Adhere your square cut piece to the lid, centering.
13. Your lid should look like this now. Adhere your circle on with a foam adhesive.
15. Place your lid on your box and then place your tassel around the circle.
This
fun gift box includes three inserts; one for $1 Lottery Tickets, one for Cash,
and one for Gift Cards! There is also room underneath the insert if you want to
include a small gift. The finished product is approximately 3" x 7" x
1/2" and it includes the base box and cover, the band, the three inserts,
and the decorative elements. The file is compatible with the 8x12 and 12x12
cutting mats! You can find the tutorial for this one and see other versions HERE!
Good morning and happy graduation season! We are still finishing up school here in Michigan, but the Seniors graduated last weekend which means there are A LOT of open houses and celebrations all around us! I have been working with a dear friend to assist with her daughter's party and created these little center pieces to sit on the tables outside!
I love that the new Solid Denim twine from The Twinery matches our high school colors just perfectly! Just look at how cute the little tassels are on the die cut graduation cap!
The Twinery Supplies:
more Graduation and Father's Day ideas!
