Bits of Paper

Good Morning! It's Monday which means new releases in my Silhouette Store!

To start things off I am going to introduce you to my new 3D Glitter Glue Holder.

This box is approximately 6-5/8" x 1-3/8" x 3-1/8" in size and is able to hold 10 Glitter Glue bottles such as Stickles and Liquid Pearls. The bottles can be stored upright or upside down as shown in the photo. The file is compatible with both the 8x12 and 12x12 mats.

Here is the tutorial:

1. Cut out your pieces and fold on the score lines.

2. Place adhesive on the four tabs of each box piece. Adhere the tabs to the box sides. You should have two pieces similar to these images now.

3. Place adhesive around the edges of the top of the box (this sits inside the base). Adhere your top in place, press on the sides to secure the adhesive.

4-5. Fill your box and embellish as desired!

Here's a look at what else is coming to my Silhouette Store this week:

Wrote by Jamie Lane Designs

I am determined to get you all organized! This (so far) is one of my MOST favorite organizers I have released...

This box is my 1" Divider Box and you can find it

in my Silhouette Store this week!

This box has 20 1" compartments which are perfect for storing your Silhouette Sketch Pens, Stickles (right side up or upside down!), Distress Paints, Ink Sprays, well basically anything you can fit in a 1" square area!

Here is the tutorial:

Please note: I changed all divider pieces to have tabs after these photos were taken to make the box stronger.

1. Cut out the pieces of the 1" Divider Box. Starting with the box, fold on all the score lines then add a strong adhesive to the tabs. Adhere the tabs to the sides.
2. Fold the tabs on the divider pieces so they are all pointing up. Place adhesive on the tabs.
3. I like to assemble my grid before inserting into the box so everything lines up properly. Place your four smaller divider pieces so the slots are up then slide in one of the longer pieces pushing the slots into place.
4. Put in the second longer piece, again pushing the slots into place as you go.
5. Finally place the third (and last) long piece lining up the slots.
6. Next, drop your grid into your box. The side tabs will be loose to provide you wiggle room before you adhere them. Move your pieces around to get straight lines.
7. When you are happy with the shape, press the tabs against the box sides to adhere them into place.

Pretty easy, right!?

You can find this cut file HERE!

Happy organizing!

Here is a sneak of what is coming this week...