This Gift Box can be used as shown as a set of two or singular. The file comes with the box base, the box lid, two inside mats (for top and bottom inside coverage), and the lid mats (seven in total). You need to cut two of the total file in order get the project shown. Each box is approximately 6" x 2-3/4" x 1-1/2" and the file is compatible with both the 8x12 and 12x12 mats. The cuts in the file are layered and separated by color. Be sure to ungroup and move the mats before cutting.
Here is the tutorial:
1. Cut out your pieces. Fold the lid and base box on its score lines. The pieces all go together the same, so in this tutorial we are showing just the lid. You will need to follow the tutorial for all pieces. Remember to cut two total files if you want the circle set of boxes. Add adhesive to the two back tabs, the two triangle tabs, and the two front tabs as shown. Flip the piece over and then add adhesive to the three tabs on each side, they all fold in. Place adhesive on the back of the coordinating inside mat.
2. Adhere the triangle tabs to the box, lining up the edges. Adhere the two tabs to the inside tabs.
3. Adhere the remaining two tabs to the inside tab area.
4. Fold the inside tab down and adhere, adhere the smallest tab to the bottom of the box.
5. Adhere the inside mat in place to hide the tabs.
6. Repeat for the box bottom. Your lid/bottom will look like this now.
7. Adhere the mats in place.
8. Cut the remaining box and embellish and fill as desired!
This Gift Box holds Blu Rays and equivalent sized boxes (such as PS3 and PS4 video games). The box is approximately 7" x 5-3/4" x 3/4" and it is compatible with both the 8x12 and 12x12 cutting mats. The file comes with the box base pieces, the insert tray, coordinating mats, and the tree embellishments shown. These boxes would perfectly with any of my gift card envelope character designs if you want to mix and match those characters/scenes!
1. Cut out all your pieces and fold on the score lines. Adhere mats in coordinating areas, centering. Place a strong adhesive/adhesive tape on the small tabs, along the long edge tab, and along the bottom as shown with the white tape in the photo.
2. Adhere the tabs to the sides to form the tray insert. Adhere the two box base pieces together (note this step is not needed for Switch box as it is one piece).
3. Adhere the box base sides together to form its shape. Then adhere the bottom tabs to close. Your box/insert tray should look like this now.
4. Insert the tray and blu ray or playstation video game.
5. Tuck the flap in to close and then embellish as desired.
This Gift Box holds Nintendo Switch and equivalent sized boxes. The box is approximately 7" x 4-3/4" x 3/4" and it is compatible with both the 8x12 and 12x12 cutting mats. The file comes with the box base pieces, the insert tray, and coordinating mats.
This Gift Box holds DVD and equivalently sized boxes (such as Nintendo Wii video games). The box is approximately 7-3/4" x 5-3/4" x 3/4" and it is compatible with both the 8x12 and 12x12 cutting mats. The file comes with the box base pieces, the insert tray, and coordinating mats as shown. These boxes would perfectly with any of my gift card envelope character designs if you want to mix and match those characters/scenes!
This fold flat snowman comes sized at approximately 7" tall. He can be made larger or smaller. He has a stand in the back that allows him to stand up or be folded flat if you are mailing. This file is compatible with both the 8x12 and 12x12 mats. Look for the standing trees and gift packages to complete the set!
This file comes with five standing trees sized at approximately 9-1/4" tall, 7" tall, and 5-3/4" tall. They can be made larger or smaller. This file is compatible with both the 8x12 and 12x12 mats. Look for the fold flat snowman and gift packages to complete the set!
This file comes with 3 gift boxes sized at approximately 2" x 1-1/2" x 1-1/2" and 2-1/4" x 1-3/4" x 1-3/4" They can be made larger or smaller. This file is compatible with both the 8x12 and 12x12 mats. Look for the fold flat snowman and standing trees to complete the set!
Find these files at my stores:
Silhouette Studio Files:
SVG & Cricut Design Studio Friendly:
These files also are featured as a FREE gift
if you spend just $15 or more at digiplayground.com!
This gift box comes with the base box which includes the wrap around sides and a lid. The box is approximately 4" x 4" x 1-1/2". You can use the box with or without the lid. All pieces are compatible with both the 8x12 and 12x12 mats.
To assemble simply place adhesive on the four tabs and adhere to the sides to form the box. Same steps for the lid! Use ribbon to pull the box sides in and tie in a bow.
This Bracket Tie box is perfect for gift giving as well as party favors! The file comes sized to fit the 8x12 mat which creates a box that is 3" (at the smallest width) x 1-3/4" x 5" but can be sized larger for the 12x12 mat with the largest being 3-3/4" (at the smallest width) x 2-1/4" x 6". The file comes with the box base in two pieces and the four coordinating mats.
The photo below shows the largest box on the left
and the smaller box (as the file comes) on the right:
Here is the tutorial:
1. Cut out all the pieces and fold on the score lines. The top of the box (the bracket) folds in then back out (shown in photo 2).
2. Place adhesive on the back of the single box piece bottom as shown.
3. Adhere the single box piece to the box, opposite of the other bracket piece.
4. Place adhesive on the four side tabs.
5. Adhere the side tabs to the box on both sides.
6. Your box should look like this now.
7. Adhere your mats in place on all four sides.
8. Fill your bag and decorate as desired!
You can find this file in my stores soon!
This Haunted House Gift Box is compatible with both the 8x12 and 12x12 mats! The box is approximately 7-3/4" x 7-3/4" (almost 9" wide with porch edges) x 1-7/8". The file comes with the box base (you will need to cut two), the solid haunted house with porch for the front of the box, the solid haunted house backing for the backside of the box, the inside mat for window color, the haunted house detail pieces including the spider and boards for windows. This box can be used as a gift box or you can set it out for home decor!
Here is the tutorial:
Check back soon for tutorial written instructions!
You can find this file in my stores soon!
This hinged box is approximately 4-1/4" x 4-3/8" x 1" and is compatible with both the 8x12 and 12x12 mats. The files come with the one piece hinged box and the coordinating mats. This is perfect for holding small gifts or baked goods!
Here's the tutorial:
1. Cut out the base box and fold on the score lines. Place adhesive on the six small tabs.
2. Adhere the tabs to the bottom sides to form the box bottom.
3. Adhere the two top tabs to the top side (with half circle cut) to form the lid.
4. This is what your box will look like closed.
5. Adhere your mats in place.
6. Embellish and fill as desired!
You can find this file in my stores soon!
This decorative gift box has a large front area to decorate or write in your sentiment (like a card) and features a hinged gift box that is approximately 5-1/4" x 2" x 1-1/4". The file comes with all the paper elements shown and is compatible with the 8x12 and 12x12 mats.
Here's the tutorial:
1. Cut out all your pieces. Grab the two large pieces (the box and scored tag piece) and fold on the score lines.
2. Place adhesive on the six tabs of the box.
3. Adhere the tabs to the box sides to form its shape.
4. Place adhesive on the bottom of the scored tag piece (all of over the smaller scored line). Place adhesive on the back edge of the box.
5. Adhere the box to the scored tag piece.
6. Adhere the mats in place.
7. Curl your leaf pieces with a skewer or pencil and adhere on the mat as shown.
8. Next grab your spiral flower pieces.
9. Begin with the smaller and start with the outside cut. Wrap it around itself. Place glue on the larger center piece and adhere the spiral in place. Adhere the outside cut to the smaller spiral flower then wrap it around the smaller flower.
10. Your flower should look like this.
11. Adhere your flower to the box and embellish as desired.
12. The box opens like a hinge so you can fill it easily with candy or goodies!
