These gift card envelopes are perfect for gift giving! The finished project is approximately 5-1/4" x 6-1/4" and comes with two inserts; one for two gift cards and the second for a single gift card. The file is compatible with both the 12x12 and 8x12 mats. You can find the tutorial for these as well as other varieties HERE.
This card is 4-1/4" x 5.5" and comes with a small gift box! The gift box is approximately 2-1/4" x 1-3/4" x 1-3/4" and folds flat if needed. The file is compatible with both the 8x12 and 12x12 mats.
These new gift card envelopes are perfect for those last minute gifts! The finished project is approximately 5-1/4" x 6-1/4" and comes with two inserts; one for two gift cards and the second for a single gift card. The file is compatible with both the 12x12 and 8x12 mats.
Here is the tutorial:
These new gift card envelopes are perfect for those last minute gifts! The finished project is approximately 5-1/4" x 6-1/4" and comes with two inserts; one for a single gift card and the second is a pocket to hold money/cash (shown). The file is compatible with both the 12x12 and 8x12 mats.
This bow is perfect for Holiday gift wrapping, placing on vases, or even for the front of a card! This bow has a second layer built in with the file. The bow can be sized to fit your needs and is compatible with both the 8x12 and 12x12 mats!
Here is the tutorial:
This file comes with the box base, the coordinating mats, and the paper embellishments The box is approximately 4-1/2" x 2" x 3" and is compatible with the 8x12 and 12x12 mats.
This Santa Suit Cracker Box is so much fun and easy to assemble! It is compatible with both the 8x12 and 12x12 mats. When finished, it is approximately 9" in length. Each panel/side is 1" with 6 sides.
Overall is about 9" x 2-1/2" x 2".
With the layered cracker box, make sure you adhere the layered pieced to the box base before adhering the box together. Line up the score lines on the layered pieces with the box base as well!
Hello from snowy Michigan. I know, it's Michigan...it's December, it's suppose to be snowy...BUT I don't think I am quite ready for it (as if that counts!)! We are just digging out from about a 10" snow fall from last night which means we got a snow day out of it. Sooo, while the kids are hanging with friends and watching a day of Netflix, I am shoveling, snowblowing, and working.
Have you gotten snow where you are?
Today I am sharing interactive Holiday cards!
NOW...we all know I don't do videos, but these are just so much more fun in person so I gave it a go once I had it all assembled...
This is the Reindeer Interactive Card. With this one, the antlers move up and down...kind of like a peek-a-boo. Simply pull the tongue to uncover the eyes.
Here is the assembly tutorial:
1. Cut out all your pieces. Fold the card in half and then fold the remaining pieces on the score lines. Adhere the long tongue piece to the antlers and adhere the body semi-circle to the bottom of the front cover piece. Adhere the nose layers, centering.
2. Place the antlers/tongue piece through the slot as shown.
3. On the backside of the head, place adhesive as shown by the white tape.
4. Adhere the head on to the front cover piece, lining up the top tab.
5. Adhere the eyes and nose on. I use foam adhesive for the nose.
6. Flip the front cover piece over and place adhesive along the two folded sides.
7. Adhere to the front of the card, centering.
8. Adhere the head tab to the inside of the card front.
9. Your card is now ready! Fold the antlers down...
10. Pull the tongue and the antlers should go up!
The Santa assembly is similar. The hat moves up and down to hide the eyes (and from side to side too!).
1. The white long piece goes through the slot like the tongue from above and the head adheres just the top and sides. For this one, I adhered the tab of the head piece to the inside of the cover piece.
2. Push the long white (suit piece) even with the bottom of the card then adhere the hat at just the TOP piece of the white (about 1/2" strip of adhesive at the top piece so the hat can slide around).
3. When you pull the white suit piece down, the eyes will cover by the hat.
4. Flip it over and place adhesive on the two side folds.
This banner comes with all the paper elements shown. When completed at the size given in the file, the banner is approximately 53" in length. The pieces can be sized to be smaller or larger and can be used separately or together as shown.
These Holiday gift holders are perfect for gift giving! The files include the base wrap, the coordinating mats, and the three tab dividers. The file is compatible with both the 8x12 and 12x12 mats.
Gift Card Holder Wrap is approximately 6" x 2-1/2"
Lottery Card Holder Wrap is approximately 6" x 2-1/2".
I have had a Wish List Organizer for years and it has seriously helped me with overspending issues as well as keeping track of what everyone wants and what I bought! Having an organizer also helps me remember everyone I need to buy for! This file is small in size to fit in your purse or bag so you can have it with you as you shop! The finished project is approximately 6" x 2-1/2" x 1/4".
The file comes with the base box, decorative mats, and print and cut tabs that are staggered in a set of 3 with numbers from 1-8 as well as blank tabs in case you want to have names instead of numbers (note: you can cut the tabs without printing and then handwrite on these instead). The box hides the lists so what you have purchased (or your ideas) are safe!
To assemble, cut out all your pieces and fold on the score lines. Adhere the coordinating mats in place and then place adhesive as shown with the white tape in photos.
Fold the center piece up, then the left flap over to line up properly, then fold the right flap over and secure in place.
This file is compatible with both the 8x12 and 12x12 mats.
My sister and I have teamed up for a new adventure and we would like to introduce you to JamieandJenn.com! This is our new SVG store where you can purchase many of our Silhouette files in SVG format as well as our Commercial User Licenses. Our SVG files are compatible with many software and die cutting machines including the Cricut Explore. Please try some of our free SVG files to make sure our formats work with yours!
This file comes with the box base, the coordinating mats, and paper elements. The box is approximately 4-1/2" x 2" x 3" and is compatible with the 8x12 and 12x12 mats. See more here!
These Holiday Circle Window Cards are approximately 4-1/2" x 4-1/2". The files come with the card base with circle front design/cut-out, a front panel mat, an inside mat and detail cuts to adhere to the front.
I use amazon links on my blog that allow me to earn from qualifying purchases. These affiliate links may be used at no cost to you which help keep this blog going!
As an agreement with the companies and teams that I design for and work with, I often receive product &/or compensation for my work. The thoughts and opinions in my blog posts are mine and I only promote the items and companies that I use myself and feel strongly about.
As always, thank you for supporting my blog!
