New Bows!

This week I have several new bows to share!  I am going to start with my two smaller bows and we will get into the larger bows tomorrow!

First up is my double layered bow.  

This layered bow is perfect for cards, boxes, and gifts! It compatible with the 8x12 and 12x12 mats and can be sized to fit your needs! 

Tutorial:

1.  Cut out all the pieces.

2.  Adhere the tabs of the bow pieces to the center of the bow.

3.  Adhere the larger bow to the center of the base.

4.  Adhere the smaller bow to the center of the larger bow.

5.  Place adhesive around the small wrapping piece and adhere in the center wrapping the bows.

6.  Ink around the edges if desired and tie a small piece of twine in the center.

And next, one of my favorites...my Triple Layer Bow!

This layered bow is perfect for cards, boxes, and gifts! 

It compatible with the 8x12 and 12x12 mats and can be sized to fit your needs! 

Tutorial:

1.  Cut out all the pieces.

2.  Place adhesive in the center of the largest bow.

3.  Bring the right tab in and adhere in the center.

4.  Bring the left tab in and adhere in the center.

5.  Repeat steps 2-4 for each bow.

6.  Adhere the largest bow in the center of the base.

7.  It should look like this now.

8.  Adhere the middle bow in place.

9.  Finally adhere the smallest bow in the center.

10. Place adhesive around the small wrapping piece 

11. Adhere in the center wrapping the bows.  Finish by tying a piece of twine around the center of the bow.

You can find both of these files HERE!