Valentine Flip Cards and Fold Over Boxes

This card is approximately 5" x 7" and features three "flipping" hearts when opening.  The card comes with the card base, the coordinating mats, and the heart cuts.  All pieces are compatible with the 8x12 and 12x12 mats. 
Here's the tutorial:
To fold, fold the card in half then fold back the open heart cuts.
The images above shows both sides of the card to help with the placement of the mats.



* * * * * 
This fold over heart box is approximately 4-1/2" x 1" x 2-3/4" and is compatible with both the 8x12 and 12x12 mats.  The file comes with the one piece box base, the wrap, and heart.  This is perfect for classroom treats or party favors as they go together quickly!  Fill with candies, gum, gift cards, and more!  
Here is the tutorial:


1. Cut out the pieces and fold on the score lines.  Adhere heart in place with foam adhesive.  Place a strong adhesive on the two tab areas as shown with the white adhesive tape in photo.
2.  Push the tab piece in
3.  The adhere the side of the box to the tab, pressing firmly to adhere.
4.  Push the two box bottom sides in, then push one tab down.  
5.  Adhere the remaining tab to close.
6.  Pinch in the two box sides at the score lined areas at the top.  
7.  Place adhesive on the straight edge of the wrap.  Adhere it to the box so the first score line hits the bottom of the box.
8.  Adhere the wrap in place as you go around the box.  Leave the top portion of the wrap without adhesive as this will be the box "lid/flap".
9.  Push the wrap down to close the box and secure with ribbon or twine!  Fill and embellish as desired.

This LOVE fold over heart box is approximately 6-1/4" x 1-1/2" x 3-3/4" and is compatible with both the 8x12 and 12x12 mats.  The file comes with the one piece box base, the wrap, and heart.  This is perfect for classroom treats or party favors as they go together quickly!  Fill with candies, gum, gift cards, and more!  
This box assembles the same as the tutorial above with the exception of the wrap.  You will need to join the two wrap pieces together.  Here is a photo to show how to do that:
The adhesive tape goes on the "short" area below the score line.  This will form the bottom of the wrap.  In this photo, the left side is the "flap/lid" and the right side is where you would start the wrap on the box front. Adhere the two pieces together then assemble according to tutorial above.  







Share:

0 comments

Related Posts Plugin for WordPress, Blogger...